Maintenance method of pp turnover box

- Nov 01, 2018-

waterproof plastic corrugated turnover box

Any production tool has a service life, the hollow sheet has some characteristics of plastic, so it is vulnerable and consumption products. If maintained properly, three to five years is no problem. The following describes the routine maintenance methods to extend the service life of the revolving box with hollow plate.

 

1. The main raw material is PP plastic, so it cannot be exposed to the sun for a long time, so as to avoid accelerated bleaching and aging of hollow sheet and shorten the service life.

 

2. The internal storage of goods shall be uniformly stressed, and shall not be centralized or placed in an eccentric position, so as to avoid deformation or tearing at joints in the revolving box of hollow sheet.

3. Do not put the goods into the box vigorously or throw it into the air to avoid breaking through the hollow sheet at the bottom of the box, causing the container to break and crack.

 

4. The cargo must not be over-loaded, and it is strictly prohibited to be overloaded, so as to avoid the breakage of the container during moving or transportation. When stacking is used, the maximum load-bearing capacity of the container should also be considered, so as to avoid overstacking the hollow sheet turnover box at the bottom.

 

5. It is better to use neutral or weakly alkaline washing liquid when cleaning to prevent the hollow plate from corroding and aging. After washing, put it in a ventilated place to dry naturally.


Contact : Mr.Morris Yu (Sales manager)

Email: sales1@corrugatedsheet-cn.com   pengfeng@corrugatedsheet-cn.com

Moblile: +86 134 6250 6270

whatsapp:+86 134 6250 6270

Wechat:ypf20201515

Website:www.corrugatedsheet-cn.com


Previous:Coroplast and Corrugated Plastic Product Next:Where to Buy Polypropylene Corflute Board